The Joint Bracket is used to suspend the conveyor track using 1/2" (12.7 mm) diameter drop rod hangers. It is tubular 1/4" (6.35 mm) thick high-strength steel, with a powder-coated finish. It has a 9/16" (14.288 mm) hole in the top to allow clearance for the drop rod. This bracket is normally used when the track joints are not welded. These are only used at track joints. For intermediate track support, we recommend using E-10-200 Support Brackets. The Joint Bracket has a load capacity of 1,000 lbs (454 kg).