Mechanical Lift, 1SP-ML-150-56V
MAJOR FEATURES OF THE ML SERIES
Ultra-low platform (no external units)
SPM motor Vector control Dry cylinder 110V single-phase power supply Built-in unit Maximum starting frequency 10 times per minute Maximum usage frequency 30 times per hour Maximum/minimum limit switch
Foot switch with LED cord: 78.7
Power cord: 118.1
Bellows type full cover (with J at the end)
Load Capacity: 330 lb.
Table Dimensions: 20.5 W x 24.8 L
Table Height: 3.2 to 16.9
Duration of lifting and lowering: 10 seconds
Motor Output: 70 Watts
Type of Motor: Surface Permanent Magnet
Deadweight: 77 lb.
NOTE: This is a standard type, therefore, Bellows cannot be installed in a standard type. After the lifter powers up, the lifter remembers the maximum and minimum position based on the first signals of the limit switch. On the succeeding operation, the lifter will stop at about 0.2 lower than the maximum position during lifting and about 0.1 higher than the minimum position when lowering. When loading from the side of the table, please do so in the following manner: From side (1) load less than or equal to ½ of the load capacity (see illustration). From side (2) load less than or equal to ¼ of the loading capacity (see illustration). Do not carry out welding operations on top of the table.
This product is not eligible for online purchase.
Please call to order this item. (877) 338-9403